Porsche 928 Workshop Manual page 502

pf?
b!ii!i> ,,I syrten,
928
._ _-~. _.--_.--_ ._ ._ _ _
a
REMOVING AND INSTALLIN<; VACIl~lh, LlNIT ON DISTRIBUTOR
1. Remove distributor cap. rotor and dust cover.
Pull off hoses from vacuum unit.
4. When installing, engage hole of pull rod in pin
on stator of transmitter.
This can be done more easily by turning rtator
against left stop and holding in this position.
3. Press up and remove vacuum unit.
The soft iron teeth of the transmitter must not be
bent, regardless of circumstances.
l
28 - 10
IRemoving and Installing Vacuum Unit Printed in Germany