Porsche 928 Workshop Manual page 875

028 Differential / Transaxle System
39
ADlUSTING RING GEAR (S,,,,l)
1. Clamp final drive housing in a vise, using a
suitable fixture.
5. Check gap between transmission case and side
cover with a feeler gauge.
A - angle iron bar 6. Calculate shim thickness Stota,
Storal = gap - 0. 30 mm (bearing preload)
2. Install differential with ring gear in housing.
Example:
G=P
Bearing preload
1.25 mm
- 0.30 mm
0.95 mm
3. Install side cover (ring gear end) without shims
and righten all bolts ~0 specified torque.
4. Guide in second side cove1 wirhour shims
carefully.
Printed inGermany - II.
1!319
Adjuring Pinion and Ring Gear
(Auromatic Transmission)
39 - 37