Porsche 928 Workshop Manual page 670

928
Clutch, Controls
30
a
+%tDew*m ori@mi ver+n
Changedii%sem Version
3. Intermediate ring 928.116.033.17
928.1 16.033.22
Travel: 0.7 1.0 mm Travel: 1.2 1.5 mm
Label 3059 008 001 Label 3059 008 101
since '84 models 928.116.033.26
Note:
(modified dowel pin centering, page 30 16 a)
If the label is missing, the travel could be determined as follows.
Press down clutch ring from starter ring side against stop.
Determine gap distance on guide with a feeler gauge blade
New version - at least 1.2 mm
Old version - at least 1 .O mm
4. Short drive shaft 928.421.235.12
Tooth distance "A"
51 mm
5. Guide tube 928.116.087.11 928.116.087.13
Total length distance "X" Total length distance "X"
50 mm 49 mm
928.421.235.13 (grayiblackl or
928.421.235.16 (dull silver)
Spline distance "A" 56 mm
Primed in Germany
VIII, 1984
Disassembling and Assembling Clutch 30.15
(Dowel Pin Centered)