Porsche 928 Workshop Manual page 488

27
Starter, Power Supply, Tempostat
928
5.Press retainers of setscrew
together and push back out of
holder.
6.Push Bowden cable and rubber
grommet through wheel-arch wall.
Note:
When installing the Bowden cable,
check to ensure that it is routed
free of kinks.
Adjusting Bowden Cable
l.Turn adjusting lever on actuator
clockwise as far as it will go.
2.Turn setscrew to adjust Bowden
cable so that there is play of
1
- 2 mm at reversing lever.
REMOVING AND INSTALLING CLUTCH
PEDAL SWITCH
See page 27 - 7.
a
a
27 - 20 Removing and Installing Bowden Cable
Printed in Germany
Removing and Installing Clutch Pedal Switch