Porsche 928 Workshop Manual page 838

928
Auromatic Transmission / Gears. Valve Body
38
Never use sharp edged rools to install seals.
7. Install seal for piston so that its sealing lip
faces down.
6. Apply a light coat of ATF IO seals and insrall
piston in support flange, pressing rhe sealing
lip into [he supporr flange with a pencil OI
ball point pen and moving in the piston care-
fully withour Ming.
9. lnsrall snap ring in groove of supporr flange,
squeeze rogether with a needle-nose pliers
and insert one-way clutch outer race.
hinted inGermany - 111. 1980
Disassembling and Assembling Clutch K 2
3x - 51