Porsche 928 Workshop Manual page 1096

37
Automatic Transmission/Controls, Case
928
a
34.Insert cover and install
36.Place secondary pump in position
circlip. Then pull cover out so and tighten hex bolts.
that it makes contact with
Tightening torque: 8 Nm
circlip around entire
(5.9 ftlb).
circumference.
35.Install backer and insert
O-ring.
37.Recheck seating of axial holder
and tighten new nut. Tightening
torque: 6 Nm (4.4 ftlb).
a
e
37 - 162 Disassembling and Assembling Transmission
Printed in Germany