Porsche 928 Workshop Manual page 1000

Differential, Transaxle System
929
- Determine the dimension "B"
- Determine the clear distance "c" (assembly
thickness) in the housing.
Assemble the complete plate assembly in ac-
cordance with the exploded drawing and
measure wfth special tool 9508/l.
"c" = "A" _ "B" Example
A= 38.90 mm
B=
- 3.6Omm
C=
35.30 mm
Measurement result:
115.30 mm
Height of the special
tool*
- 81.50 mm
Package thickness
* marked on toot
33.80 mm
- Adjust the thickness of the plate assembly
to the calculated value "c" L? 0.1 mm by
means of the outer adjusting plate (No. 18).
5. Installation position of Gylon inner plates
Fit Gyton inner plates so that the cdor point
is visible during assembly and so that the
spiral groove for the oil supply runs from in-
side to outside in clockwise direction when
looking at the plate assembly (assembly
direction) (refer to simplified diagram).
39 - 212p
Dismantling and assembling the proportional-slip differential
a
Printed in Germany - XXIV, 198!3