Porsche 928 Workshop Manual page 214

15
Engine, Cylinder Head, Valves
928
10. Remove clutch slave cylinder. Take off
clamp on clutch hose holder and remove
push rod. Let cylinder with connected
line hang down.
Note
Never operate clutch pedal after removing
the slave cylinder.
11. Align mark for 45O before TDC
fcyl. 1) on vibration damper with red
needle by turning crankshaft clockwise.
Note
Camshafts may be turned without damaging
the valves after aligning the 45' mark.
12. Mount Special Tool 9161 / 1 with
original screws to hold the crankshaft.
. .-,--I ">:-
Y, , ~~~":~
I
<; .--- " ,,I
y//3
13. Unscrew bolt (wrench size 27 mm) on
crankshaft and take off both pulleys,
vibration damper and collar.
14. Loosen and unscrew guide tube for oil
diostick.
15. Unscrew console with alternator on
engine.
15 - 106 Replacing Toothed Belt
Printed in Germany