Porsche 928 Workshop Manual page 1070

37
Automatic Transmission/Controls, Case
REMOVING AND INSTALLING REAR TRANSMISSION CASE
928
a
Removing
---..-+;;R
fimkkive-si=&+e
(see page 39 101).
2. Remove case mounting bolts.
A = Five M IO x 55 bolts
B = Four M 10 x 40 bolts
Installing
I. Drive in inner seal to correct position with
Special Tool 9180/I.
Note:
Hold seal on special tool with a small amount
of grease and drive in seal that sealing lip
faces automatic transmission.
2. Drive in outer seal to correct position
with Special Tool 9180/l.
Note:
Seal must be installed that its sealing lip
faces final drive.
a
a
a
37 134 Removing and Installing Rear Transmission Case
Printed in Germany