Porsche 928 Workshop Manual page 867

39
Dlfferenrial / Transaxle SVslem
928
DlSASSEMBLlNG AND ASSEMBLING BEARING ASSEMBLY FOR AUTOMATIC
TRANSMISSION
Disassembling
Assembling
1. Press OUI pinion with VW 516.
U-
'~7-:
-
w---e
Note
Bearing flange is only available as a complere
unit (with rapered roller bearings and adjusting
ring) for replacements.
1. Hear tapered roller bearing inner race to
-
:,
approx. 100' C/212' F and drive on.
2. Press on assembled bearing with VW 415 a.
approx. 5 Kl"S force.
2. Press off tapered roller bearing inner race with
a special rool separator US 1103.
3. If necessary. determine rbickness of shims for
bearing assembly.
30 - 28
Disassembling and Assembling Bearing Assembly
Printed in Germany
for Automatic Transmission