Porsche 928 Workshop Manual page 820

38
Auromaric Transmission / Gears. Valve Bodv 92x
DISASSEMBLING AND ASSEMBLING CENTRIFUGAL GOVERNOR
Disassembling
1. Unscrew bolts and remove valve body as well
as governor housing from flange.
h- ,jzqq ;~
?:'
' 7
'1
"~y2 ~
..-~ rn~ _'
f
-\
Be careful noi 10 damage filter screen in flange
when taking off housing.
2. Press off spring retainer. Remove cenrrifugal
weight with valve and springs.
I
Assembling
Clean all pars in clean gasoline thoroughly. Check
shift valve and governor valve for damage and easy
movement in their bores.
1. Place filler screen in seat provided for this pur-
pose in oil bore and install valve body on flange
[hat oil outler slot faces oil seals and oil bores
align.
A
ri
63 -a
\
q$,,-.,
1 L
.*
*i
\I ,=!2 Q,
fi,
\$' \,' .'
s-f
-1
A
A - Gil
bores
2. Place filler screen in seat provided for this pur-
pose in oil bore and install governor housing rhar
oil outlet slot faces oil seals and oil bores al@;.
A - Oil bores
38 - 32 Disassembling and Assembling Centrifugal Governor
Printed in Germany