Porsche 928 Workshop Manual page 934

34
Manual Transmission/Controls, Case 928
ll.Attach Special Tool
9144 to
drive-pinion bearing cover and
carefully insert drive
P
inion
(with 4th gear selected . Note
position of reverse idler.
12.With a suitable tool, move
reverse idler to installation
position, remove centering pins
9321 for bearing assembly and
turn the latter with shims until
the reverse idler shaft can be
installed.
--pqq ,,
v
A+gj;:-+v/
.- ".$ygy?+... ';';, ,,' j
; $&@~,!^I " ';::?2 ;, .' :.
b _
A = Special Tool
9321
Note:
When installing drive pinion, it is
essential to ensure that the dogs of
the synchromesh ring (5th gear)
engage the recesses of the
guide sleeve.
13.Turn bearing assembly with shims
"S " to assembly position,
tighten mounting bolts to 30 Nm
(22 ftlb) and remove Special Tool
9144.
a
34 - 214 j Disassembling and Assembling
Printed in Germany
Manual Transmission ('87 Models Onward)