Porsche 928 Workshop Manual page 739

928
Auromaric Transmission / Conrrols. Case
37
FRONT CONVERTER HOI!SING. EXCHANGING
Before installing new automatic transmission/final drive assembly inro vehicle. front convener housings
mu1 be exchanged berween new and old units. This is to maintain factory adjustmenr between drive
shafr coupling and transmission input shaft.
Perform following sLeps:
1. Loosen 6 bolts (2) attaching drive plate IO
rorque converter (1) through opening (arrow).
2. Remove 8 bolts holding front convener housing
(A).
3.
Exchange front converter housings only.
4. Tighten converter housing bolts to 1.9 - 2. 3
mkg (14 - 17 fr lb).
5. Tighten drive plate bolts to 3. 2 - 3.9
mkg
(23 - 28
ft lb).
Printed in Germany - II, 1979
Exchanging Front Converter Housing
37-6a