Avaya Definity SI Maintenance Manual page 184

Routine Maintenance Procedures
a. If an A500 port to which a DEFINITY port network is attached is not
2. If the A500 was administered using hard-coded PNNI routes to identify
each endpoint, enter show signaling routes on the A500 console.
5-18 shows the screen output.
A500:show signaling routes
Number of Local Static Routes Allowed: 30
Current number of Local Static Routes: 2
Address: 47.00.05.80.ff.e1.00.00.00.f2.07.2a.01.00.00.00.00.00.00.00
mask:152 cost:
Address: 47.00.05.80.ff.e1.00.00.00.f2.07.1b.02.00.00.00.00.00.00.00
mask:152 cost:
Screen 5-18. Screen output from the show signaling routes command
Check that the Address field (administered using admin signaling route
add) matches those administered in DEFINITY.
3. If the A500 was administered using End System Identifiers, enter show
signaling esi on the A500 console.
output.
5-80 Issue 4 May 2002
listed in this display, it is likely that the port was administered
incorrectly as having no UNI signaling (admin link command).
Ensure that fields listed have the values indicated below.
Field
IntType Network
If User, links will not come up between the PPN and the
EPN.
Signaling UNI3.1
If it is UNI3.0, links will not come up between the PPN
and the EPN.
Preferred value of is No, however this alone does not
ILMI
prevent links from coming up between the PPN and an
EPN.
May or may not be UP. Their values depend on more than
SAP State
just whether the port was marked as UP. (See highlighted
data for SAP State in
0 node:self port:A1.2 state:UP
0 node:self port:A1.1 state:UP
Value
Screen 5-17 on page
Screen 5-19 on page 5-81
5-79.)
Screen
shows the
555-233-123