Nic Boot Rom - Avaya Media Processing Server 1000 Hardware Installation And Maintenance

Configuration
...........................................................
...........................................................
...........................................................
...........................................................
.................
Load Successful
No FPGA load required for MDM/TMS-2500 in slot 0, card 1
Loading DCC-2000-T1 in slot 4, card 0 with
xldccpli.sm
...........................................................
.................................
Load Successful
No FPGA load required for
Initializing Device Drivers:
TDM Driver.............SUCCESSFUL
VMEM Driver............SUCCESSFUL
PKG Driver.............SUCCESSFUL
ALI Driver.............SUCCESSFUL
TSS Driver.............SUCCESSFUL
MXD Driver.............SUCCESSFUL
PLL Driver.............SUCCESSFUL
Driver Initialization Complete
5. When the TMS boots, the Alarm Viewer indicates the system is running. If additional TMS
are installed in the system, return to
repeat these procedures for each TMS.

NIC Boot ROM

The boot ROM on the NICs must be verified or modified upon initial installation or when a NIC is
replaced.
Avaya Media Processing Server 1000 Hardware Installation and Maintenance
144
...........................................................
in slot 6, card 0
DCC Boot ROM
Comments? infodev@avaya.com
on page 140 and TMS Boot ROM, and
October 2014