Tms Front Panel - Avaya Media Processing Server 1000 Hardware Installation And Maintenance

Table 10: FCP Indicators and Controls
Item
TEST / ON / OFF switch (slots
1, 2, 3, and 4)
POWER ON indicator (all
slots)
NORMAL indicator (all slots)
MINOR ALARM indicator (all
slots)
MAJOR ALARM indicator (all
slots)
RESET switch

TMS Front Panel

In addition to FCP indicators, the system components have internal indicators for system
maintenance and fault isolation. On the front panel of the TMS are connections to a diagnostic
console for troubleshooting, LED indicators for TMS health checks, and the span input/output
connector.
October 2014
Function
Three position rocker switch used to turn power to the TMS on or off, or to
test the associated power supply. The TEST / ON / OFF switches for slots
5 and 6 are on the VRC rear panel. See
Illuminates green when power is applied to the TMS.
Illuminates green when TMS is operating properly and no alarms or system
faults exist.
Flashes yellow when a minor alarm is active. Accompanied by audible
indication (beep). To reset, press the RESET switch.
Flashes red when a major alarm is active. Accompanied by audible
indication (beep). To reset, press the RESET switch.
Momentary push-button switch used to reset visual and audible alarm
indications.
Avaya Media Processing Server 1000 Hardware Installation and Maintenance
Comments? infodev@avaya.com
TMS Front Panel
VRC Rear Panel on page 163.
161