Configuring Ipmp For Solaris Based Processors; Sun Netra - Avaya Media Processing Server 1000 Hardware Installation And Maintenance

e. DNS server setup is site-specific, get the settings from your local network administrator.
3. Verify Fault Switch Tolerance.
a. Run the ping command from the Command Prompt window of another PC.
a. Solaris based system:
ping -s 10.7.0.1
b. Windows based system:
ping -t 10.7.0.1
b. View the results of the ping command by scrolling down the screen. Test the Ethernet
connection by disconnecting and reconnecting the Ethernet cables one at a time. The
Fault Switch Tolerance is working correctly if no interruption occurs in the ping results.

Configuring IPMP for Solaris Based Processors

Sun Netra

Use the following procedure to configure IPMP with one active and one standby interface.
1. Ensure that both Ethernet network interfaces have a unique MAC address.
2. Team together Ethernet network interfaces of the same type.
3. All interfaces of the multipathing group must be connected to the same IP subnet.
For example, bge0, bge1 for node name MPSAP1-a.
October 2014 Avaya Media Processing Server 1000 Hardware Installation and Maintenance
Comments? infodev@avaya.com
Configuring IPMP for Solaris Based Processors
119