Configuring And Updating The Terminal Server Through Tftp - Avaya Media Processing Server 1000 Hardware Installation And Maintenance

Configuration
Configuring And Updating the Terminal Server through
TFTP
This is the simplest and recommended method to configure the terminal server. The software and
configuration files are placed in the /tftpboot directory on the MPS Application Processor running the
TFTP daemon to install and configure ppp support automatically.
Four files must be installed in the /tftpboot directory of the bootp server:
• updated boot firmware ppciboot.img (version 1.1.0)
• updated Terminal Server software linuxito.img (version 3.1.0)
• two configuration files:
- default config file lx------.prm
- actual config file lx------.zip
The actual name of the lx------.xxx file depends on the hardware (MAC) address of the terminal
server. These files are distributed as one file lxperi.zip. The filet must be renamed and copied
to the lx------.prm file. Both files must exist on the TFTP boot server.
The final names are of the form: lx(last 6 digits of the MAC address).zip
For example, the displayed MAC address of a particular Terminal server is 00:a0:9c:00:02:07.
The files are renamed to lx000207.zip and copied to lx000207.prm.
Avaya Media Processing Server 1000 Hardware Installation and Maintenance
110
Comments? infodev@avaya.com
October 2014