Replacing A Tape, Cd-Rom Or Floppy Drive - Avaya CallPilot 1002rp Maintenance And Diagnostics

Replacing media drives
4. Label and disconnect cables from installed media drives, and then free the carrier

Replacing a tape, CD-ROM or floppy drive

This section describes how to replace a media drive (tape, CD-ROM, or floppy drive) in the
media drive carrier.
To replace a media drive
1.
2. Remove the faulty drive from the media drive carrier and save the screws (see the
104 Avaya CallPilot® 1002rp Server Maintenance and Diagnostics
To avoid damaging cables during this procedure, ensure that no cables are
crossed when moving the media drive carrier in and out of the drive bay.
from the chassis.
Caution:
Risk of equipment damage
Use an ESD wrist strap to protect static-sensitive components.
Remove the media drive carrier from the chassis (see
carrier from the chassis
diagrams that follow).
Note:
To remove the tape drive or CD-ROM drive, you must first remove the floppy drive.
on page 101).
Removing the media drive
December 2010