Avaya Media Processing Server 1000 Hardware Installation And Maintenance page 206

Maintenance
d. Disable all other network interfaces.
e. Configure Networking to match customer configuration.
5. Install the Avaya software.
6. Verify the setup.
7. Activate windows with product key from COA, if available. Else skip this step. See
windows 2008
8. Set windows Update to never check for updates, then check for updates and update all
Important and Recommended patches.
9. Reboot if required by windows update.
Cleaning up the setup
Procedure
1. Go to Internet Explorer > Internet Options and click Delete All to clear out temp files,
cookies, etc.
2. To run disk clean up, click Start and type clean in the search box. Click Disk Cleanup.
Ensure that you choose to cleanup Files from All users.
3. Click Start and at the Command Prompt, type c:\windows\system32\sysprep
\sysprep /oobe /shutdown or with GUI if it is active.
4. Pack and ship to customer site.
5. Set Country, Time, and Keyboard.
6. Accept license and start.
7. Set the initial administrator password.
Avaya Media Processing Server 1000 Hardware Installation and Maintenance
206
on page 208.
Comments? infodev@avaya.com
Activating
October 2014