Standalone Cabinet; Handling Optical Cables - Avaya Media Processing Server 1000 Hardware Installation And Maintenance

Hide thumbs Also See for Media Processing Server 1000:
Table of Contents

Advertisement

Standalone Cabinet

A single cabinet MPS 1000 system uses a Standalone Cabinet with the Primary and Secondary
NICs connected by a patch cord installed on the Patch Panel.

Handling Optical Cables

Caution:
Optical cables are fragile and the internal glass fibers are susceptible to breaking when they are
subjected to a bend radius of less than 3 inches. Never secure an optical cable with devices that
can cause a sharp bend. Be careful when removing and installing the connectors and never pull
on a cable to remove the connector.
The ATM patch panel has an internal tray that can be swung out on a hinge for access to the panel.
All cables must be routed through the rear of this device. Use the internal spool to store excess
cable.
October 2014
Avaya Media Processing Server 1000 Hardware Installation and Maintenance
Comments? infodev@avaya.com
Standalone Cabinet
57

Advertisement

Table of Contents
loading

Table of Contents