View Statistics - NETGEAR M4300 User Manual

M4300 Series and M4300-96X Fully Managed Switches User Manual
By default, the rate limit is 100 packets/sec (the burst interval is 1000 msec). To disable
ICMP Rate limiting, set this field to 0. The valid rate Interval is from 0 to 2147483647.
Use ICMP Rate Limit Burst Size to control the ICMP error packets by specifying the
10.
number of ICMP error packets that are allowed per burst interval.
By default, burst size is 100 packets. When the burst interval is 0, then configuring this
field is not a valid operation. The valid burst size range is 1 to 200.
Use Select to configure Global Default Gateway to edit the Global Default Gateway field.
11.
Use Global Default Gateway to set the global default gateway to the manually configured
12.
value. A default gateway configured with this command is more preferred than a default
gateway learned from a DHCP server. Only one default gateway can be configured. If you
invoke this command multiple times, each command replaces the previous value.
Click the Apply button.
13.
Your settings are saved.
The following table describes the nonconfigurable information displayed on the page.
Table 104. Routing IP Configuration
Field
Default Time to Live
Maximum Next Hops
Maximum Routes

View Statistics

The statistics reported on this page are as specified in RFC 1213.

To view statistics:
Launch a web browser.
1.
In the address field of your web browser, enter the IP address of the switch.
2.
The login window opens.
Enter the user name and password.
3.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
Click the Login button.
4.
The System Information page displays.
Select Routing> IP > Basic > Statistics.
5.
Description
The default value inserted into the Time-To-Live field of the IP header
of datagrams originated by the switch, if a TTL value is not supplied by
the transport layer protocol.
The maximum number of hops supported by the switch. This is a
compile-time constant.
The maximum number of routes (routing table size) supported by the
switch. This is a compile-time constant.
Routing
292