Appendix A Default Settings - NETGEAR M4300 User Manual

Default Settings
A.
This appendix describes the default settings for many of the NETGEAR switch software
features.
Table 227. Default Settings
Feature
IP address for management VLAN 169.254.100.100
Service port IP address
Subnet mask
Default gateway
Protocol
Management VLAN ID
Minimum password length
IPv6 management Mode
SNTP client
SNTP server
Global logging
CLI command logging
Console logging
RAM logging
Persistent (FLASH) logging
DNS
SNMP
SNMP Traps
Auto Install
Default
192.168.0.239
255.255.0.0
0.0.0.0
DHCP
1
Eight characters
None
Enabled
Not configured
Enabled
Disabled
Enabled (Severity level: debug and above)
Enabled (Severity level: debug and above)
Disabled
Enabled (No servers configured)
Enabled (SNMPv1/SNMPv2, SNMPv3)
Enabled
Enabled
680
A