Add An Entry To The Arp Table - NETGEAR M4300 User Manual

M4300 Series and M4300-96X Fully Managed Switches User Manual
The System Information page displays.
Select Routing> ARP > Basic > ARP Cache.
5.
The page displays the following information:
IP Address. Displays the IP address associated with the system's MAC address. This
•
address must be the IP address of a device on a subnet attached to one of the
switch's existing routing interfaces.
Port. Displays the associated unit/slot/port of the connection.
•
MAC Address. Displays the unicast MAC address of the device. The address is six
•
2-digit hexadecimal numbers separated by colons, for example, 00:06:29:32:81:40.
The pagination navigation menu functions as follows:
Rows per page. Select how many table entries are displayed per page. Possible
-
values are 20, 50, 100, 200, and All. If you select All, the browser might be slow to
display the information.
<. Display the previous page of the table data entries.
-
>. Display the next page of the table data entries.
-
To refresh the page with the latest information on the switch, click the Update button.
6.

Add an Entry to the ARP Table

You can add an entry to the Address Resolution Protocol (ARP) table.

To add an entry to the ARP table:
Launch a web browser.
1.
In the address field of your web browser, enter the IP address of the switch.
2.
The login window opens.
Enter the user name and password.
3.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
Click the Login button.
4.
The System Information page displays.
Routing
326