Configure Igmp Snooping Querier For Vlans - NETGEAR M4300 User Manual

M4300 Series and M4300-96X Fully Managed Switches User Manual

Configure IGMP Snooping Querier for VLANs

You can configure IGMP queriers for use with VLANs on the network.

To configure querier VLAN settings:
Launch a web browser.
1.
In the address field of your web browser, enter the IP address of the switch.
2.
The login window opens.
Enter the user name and password.
3.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
Click the Login button.
4.
The System Information page displays.
Select Switching> Multicast > IGMP Snooping > Querier VLAN Configuration.
5.
To create a new VLAN ID for IGMP snooping, select New Entry from the VLAN ID field and
6.
complete the following fields.
You can also set pre-configurable snooping querier parameters.
VLAN ID. The VLAN ID for which the IGMP snooping querier is to be enabled.
•
Querier Election Participate Mode. Enable or disable querier Participate mode.
•
Disabled. Upon seeing another querier of the same version in the VLAN, the
-
snooping querier moves to the non-querier state.
Enabled. The snooping querier participates in querier election, in which the least
-
IP address operates as the querier in that VLAN. The other querier moves to
non-querier state.
Snooping Querier VLAN Address. Specify the snooping querier IP address to be
•
used as the source address in periodic IGMP queries sent on the specified VLAN.
Click the Apply button.
7.
Your settings are saved.
Configure Switching Information
242