NETGEAR M4300 User Manual page 146

M4300 Series and M4300-96X Fully Managed Switches User Manual
Table 50. LLDP-MED Remote Device Information (continued)
Field
Network Policy Information: Specifies if network policy TLV is received in the LLDP frames on this
port.
Media Application Type
VLAN Id
Priority
DSCP
Unknown Bit Status
Tagged Bit Status
Inventory Information: Specifies if inventory TLV is received in LLDP frames on this port.
Hardware Revision
Firmware Revision
Software Revision
Serial Number
Manufacturer Name
Model Name
Asset ID
Location Information: Specifies if location TLV is received in LLDP frames on this port.
Sub Type
Location Information
Extended POE: Specifies if remote device is a PoE device.
Device Type
Extended POE PSE: Specifies if extended PSE TLV is received in LLDP frame on this port
Available
Source
Priority
Description
The application type. Types of application types are unknown,
voicesignaling, guestvoice, guestvoicesignalling, softphonevoice,
videoconferencing, streammingvideo, vidoesignalling. Each
application type that is received has the VLAN ID, priority, DSCP,
tagged bit status and unknown bit status. A port can receive one or
many such application types. If a network policy TLV was received on
this port, only then would this information be displayed.
The VLAN ID associated with a particular policy type.
The priority associated with a particular policy type.
The DSCP associated with a particular policy type.
The unknown bit associated with a particular policy type.
The tagged bit associated with a particular policy type.
Specifies hardware version of the remote device.
Specifies Firmware version of the remote device.
Specifies Software version of the remote device.
Specifies serial number of the remote device.
Specifies manufacturers name of the remote device.
Specifies model name of the remote device.
Specifies asset ID of the remote device.
Specifies type of location information.
The location information as a string for given type of location ID.
Specifies remote device's PoE device type connected to this port.
The remote ports PSE power value in tenths of watts.
The remote ports PSE power source.
The remote ports PSE power priority.
Configure System Information
146