NETGEAR M4300 User Manual page 522

M4300 Series and M4300-96X Fully Managed Switches User Manual
Next to Allow new telnet sessions, select the Disable or Enable radio button.
6.
This specifies whether the new outbound Telnet session is enabled or disabled. The
default value is Enabled so that new outbound Telnet sessions can be established until
there are no more sessions available. If it is disabled, no new outbound Telnet sessions
are established. An established session remains active until the session is ended or an
abnormal network error ends the session.
In the Session Timeout field, specify how many minutes of inactivity occur on an inbound
7.
Telnet session before the session is logged off.
You can enter any number from 1 to 160. The factory default is 5 minutes.
In the Maximum Number of Sessions field, specify how many simultaneous inbound
8.
Telnet sessions are allowed.
The maximum is 5, which is also the factory default.
Click the Apply button.
9.
Your settings are saved.
The Current Number of Sessions field displays the number of current outbound Telnet
sessions.
Manage Device Security
522