M4300 Series and M4300-96X Fully Managed Switches User Manual
In the Group ID list, select the group ID.
6.
Use Port List to add the ports you selected to this private group.
7.
The port list displays when at least one group is configured.
Click the Apply button.
8.
Your settings are saved.
The following table describes the nonconfigurable information displayed on the page.
Table 200. Private Group Membership
Field
Group Name
Group Mode
Description
The name for the private group that you selected. It can be up to 24
non-blank characters long.
The mode of the private group that you selected. The modes are as
follows:
community
•
isolated
•
When in isolated mode, the member port in the group cannot forward
its egress traffic to any other members in the same group. By default,
the mode is community mode. Each member port can forward traffic to
other members in the same group, but not to members in other groups.
Manage Device Security
548