NETGEAR M4300 User Manual page 329

M4300 Series and M4300-96X Fully Managed Switches User Manual
Use Age Time to enter the amount of time, in seconds, that a dynamic ARP entry remains
6.
in the ARP table before aging out.
The range is 15 to 21600 seconds. The default value for Age Time is 1200 seconds.
Use Response Time to enter the amount of time, in seconds that the device waits for an
7.
ARP response to an ARP request that it sends.
The range for this field is 1 to 10 seconds. The default value is 1 second.
Use Retries to enter the maximum number of times an ARP request will be retried after an
8.
ARP response is not received.
The number includes the initial ARP request. The range for this field is 0 to 10. The
default value for Retries is 4.
Use Cache Size to specify the maximum number of entries allowed in the ARP table.
9.
This number includes all static and dynamic ARP entries.The range for this field is 256 to
1536. The default value for Cache Size is 1536.
When selected, the Dynamic Renew option allows the ARP component to automatically
10.
attempt to renew dynamic ARP entries when they age out.
The default setting is Enable.
Use Remove from Table to remove certain entries from the ARP table.
11.
The choices listed specify the type of ARP entry to be deleted:
• All Dynamic Entries
• All Dynamic and Gateway Entries
Specific Dynamic/Gateway Entry. Selecting this allows the user to specify the
•
required IP address.
Specific Static Entry. Selecting this allows the user to specify the required IP
•
address.
None. Selected if the user does not want to delete any entry from the ARP Table.
•
Remove IP Address. This field displays only if you select Specific
•
Dynamic/Gateway Entry or Specific Static Entry in the Remove from Table list.
The Remove IP Address field allows you to enter the IP address against the entry
that is to be removed from the ARP table.
Click the Apply button.
12.
Your settings are saved.
The following table describes the nonconfigurable information displayed on the page.
Table 118. ARP Table Configuration
Field
Total Entry Count
Peak Total Entries
Description
Total number of entries in the ARP table.
Highest value reached by Total Entry Count. This counter value is
restarted whenever the ARP table Cache Size value is changed.
Routing
329