View And Clear Switch Statistics - NETGEAR M4300 User Manual

M4300 Series and M4300-96X Fully Managed Switches User Manual
Configure the Falling Threshold.
8.
Notification is triggered when the total CPU utilization falls below this level for a
configured period of time.
The falling utilization threshold must be equal to or less than the rising threshold value.
The falling utilization threshold notification is made only if a rising threshold notification
was done previously. Configuring the falling utilization threshold and time period is
optional. If the Falling CPU utilization parameters are not configured, then it takes the
same value as Rising CPU utilization parameters. The range is 1 to 100.
Configure the Falling Interval.
9.
The utilization monitoring time period can be configured from 5 seconds to 86400
seconds in multiples of 5 seconds.
Configure the CPU Free Memory Threshold value in KB.
10.
Click the Apply button.
11.
Your settings are saved.

View and Clear Switch Statistics


To view and clear the switch statistics:
Launch a web browser.
1.
In the address field of your web browser, enter the IP address of the switch.
2.
The login window opens.
Enter the user name and password.
3.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
Click the Login button.
4.
The System Information page displays.
Select System > Management > Switch Statistics.
5.
Configure System Information
44