NETGEAR M4300 User Manual page 352

Fully managed stackable switches
Hide thumbs Also See for M4300:
Table of Contents

Advertisement

M4300 Series and M4300-96X Fully Managed Switches User Manual
Configuring this field overwrites any present interface level passive mode setting. OSPF
does not form adjacencies on passive interfaces, but does advertise attached networks
as stub networks. The default is Disabled.
Click the Apply button.
18.
Your settings are saved.
The following table describes the nonconfigurable information that is displayed.
Table 126. OSPF Configuration
Field
ASBR Mode
ABR Status
External LSA Count
External LSA Checksum
AS_OPAQUE LSA Count
AS_OPAQUE LSA Checksum
New LSAs Originated
LSAs Received
Description
The router is an autonomous system boundary router if it is configured
to redistribute routes from another protocol, or if it is configured to
originate an external LSA advertising the default route.
The router is an autonomous system boundary router if it is configured
to redistribute routes from another protocol, or if it is configured to
originate an external LSA advertising the default route.
The number of external (LS type 5) LSAs (link state advertisements) in
the link state database.
The sum of the LS checksums of the external LSAs (link state
advertisements) contained in the link state database. This sum can be
used to determine if there was a change in a router's link state
database, and to compare the link state databases of two routers. This
value is in hexadecimal.
The number of opaque LSAs with domain-wide flooding scope.
The sum of the LS checksums of the opaque LSAs with domain wide
flooding scope. This sum can be used to determine if there was a
change in a router's link state database, and to compare the link state
databases of two routers. This value is in hexadecimal.
In any given OSPF area, a router originates several LSAs. Each router
originates a router-LSA. If the router is also the designated router for
any of the area's networks, it originates network LSAs for those
networks. This value represents the number of LSAs originated by this
router.
The number of LSAs (link state advertisements) received that were
determined to be new instantiations. This number does not include
newer instantiations of self-originated LSAs.
OSPF and OSPFv3
352

Advertisement

Table of Contents
loading

This manual is also suitable for:

M4300-96x

Table of Contents