View Stp Statistics - NETGEAR GC728X User Manual

Insight Managed 28-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP 1G & 2 SFP+ 10G Fiber Ports

View STP Statistics

You can view information about the number and type of bridge protocol data units (BPDUs)
transmitted and received on each port.

To view Spanning Tree statistics:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4. Enter the switch's password in the password field.
The default password is password. If you added the switch to a network on the Insight
app before and you did not yet change the password through the local browser interface,
enter your Insight network password.
The System Information page displays.
5. Select Switching > STP > Advanced > STP Statistics.
The STP Statistics page displays.
6. To refresh the page with the latest information about the switch, click the Refresh button.
The following table describes the information available about the STP Statistics page.
Table 39. STP Statistics
Field
Interface
STP BPDUs Received
STP BPDUs Transmitted
RSTP BPDUs Received
RSTP BPDUs Transmitted
MSTP BPDUs Received
MSTP BPDUs Transmitted
Description
The physical or port channel interfaces of the switch.
The number of STP BPDUs received at the port.
The number of STP BPDUs transmitted from the port.
The number of RSTP BPDUs received at the port.
The number of RSTP BPDUs transmitted from the port.
The number of MSTP BPDUs received at the port.
The number of MSTP BPDUs transmitted from the port.
Configure Switching
148
Access the Switch on page 13.