Configure Vlan Membership - NETGEAR M4300 User Manual

M4300 Series and M4300-96X Fully Managed Switches User Manual
Select from the list to configure the Native VLAN ID.
10.
This is the native VLAN for the port, and is valid only when the port switchport mode is
Trunk.
Configure the Trunk Allowed VLANs.
11.
This is the set of VLANs of which the port can be a member when configured in Trunk
mode. By default, this list contains all possible VLANs, even if they are not yet created.
VLAN IDs are in the range 1 to 4093. Use a hyphen (-) to specify a range, or a comma (,)
to separate VLAN IDs in a list. Spaces are not permitted. A zero value clears the allowed
VLANs. An All value sets all VLANs in the range (1 to 4093).
Click the Apply button.
12.
Your settings are saved.
The Native VLAN Tagging field displays enabled or disabled:
When VLAN tagging is enabled, if the trunk port receives untagged frames, it forwards
•
them on the native VLAN with no VLAN tag.
When VLAN tagging is disabled, if the trunk port receives untagged frames, it includes
•
the native VLAN ID in the VLAN tag when forwarding

Configure VLAN Membership


To configure VLAN membership:
Launch a web browser.
1.
In the address field of your web browser, enter the IP address of the switch.
2.
The login window opens.
Enter the user name and password.
3.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
Click the Login button.
4.
The System Information page displays.
Select Switching> VLAN > Advanced > VLAN Membership.
5.
Configure Switching Information
184