View Nsf Summary Data - NETGEAR M4300 User Manual

M4300 Series and M4300-96X Fully Managed Switches User Manual
Specify whether Stack Firmware Auto Upgrade is enabled or disabled.
6.
This feature determines what to do when a new member attempts to join the stack, and
its firmware does not match the version running on the master.
Enable. The stack master upgrades the version on the new member to match the
•
version running on the rest of the stack.
Disable. The new member is not allowed to join.
•
Use the Traps field to enable or disable sending of traps during stack firmware
7.
synchronization start, failure, or finish.
Use the Allow Downgrade field to determine whether the stack master downgrades the
8.
firmware version on a new member that attempts to join the stack if the new member has a
firmware version that is more recent that the stack.
Click the Apply button.
9.
Your settings are saved.

View NSF Summary Data


To display NSF Summary data:
Launch a web browser.
1.
In the address field of your web browser, enter the IP address of the switch.
2.
The login window opens.
Enter the user name and password.
3.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
Click the Login button.
4.
The System Information page displays.
Select System > Stacking > NSF > NSF Summary
5.
Stacking
173