NETGEAR M4300 User Manual page 63

M4300 Series and M4300-96X Fully Managed Switches User Manual
Configure an IPv6 Management Interface
Use this page for port-based IP management for IPv6.

To configure an IPv6 management interface:
Launch a web browser.
1.
In the address field of your web browser, enter the IP address of the switch.
2.
The login window opens.
Enter the user name and password.
3.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
Click the Login button.
4.
The System Information page displays.
Select System > Management > Management Interfaces > IPv6 Management Interface
5.
Configuration.
Use the Interface list to select the interface for which IPv6 parameters or management
6.
interface can be changed.
When you select the Set Management Interface option, it means that the management
7.
interface must be configured based on the interface selected. By default, this option is not
selected.
Select the radio button to enable or disable the Routing Mode on the management
8.
interface.
Select the radio button to enable or disable the IPv6 Mode on the management interface.
9.
Select the radio button to enable or disable the DHCPv6 Client Mode on the management
10.
interface.
Select the radio button to enable or disable the Address Autoconfigure Mode on the
11.
management interface.
The Address AutoConfigure Mode option is available only if Unicast
Note:
Routing is globally disabled.
Configure System Information
63