View The Ospfv3 Link State Database - NETGEAR M4300 User Manual

M4300 Series and M4300-96X Fully Managed Switches User Manual
The following table describes the nonconfigurable information that is displayed.
Table 144. Advanced OSPFv3 Neighbor Table
Field
Interface
Interface Identifier
Router ID
Area ID
Options
Router Priority
State
Dead Time
Events
Retransmission Queue Length

View the OSPFv3 Link State Database


To view the OSPF link state database:
Launch a web browser.
1.
In the address field of your web browser, enter the IP address of the switch.
2.
The login window opens.
Enter the user name and password.
3.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
Click the Login button.
4.
The System Information page displays.
Select Routing > OSPFv3 > Advanced > Link State Database.
5.
Description
The interface for which data is to be displayed or configured. Slot 0 is
the base unit.
The interface ID that the neighbor advertises in its hello packets on this
link.
A 32-bit integer in dotted-decimal format representing the router ID of
the neighbor on the selected interface.
A 32-bit integer in dotted-decimal format representing the area
common to the neighbor selected.
A bit mask corresponding to the neighbor's options field.
The priority of this neighbor in the designated router election algorithm.
A value of 0 signifies that the neighbor is not eligible to become the
designated router on this particular network.
The state of the relationship with this neighbor.
The amount of time, in seconds, since the last hello was received from
adjacent neighbors. Set to 0 for neighbors in a state less than or equal
to Init.
The number of times this neighbor relationship changed state, or an
error occurred.
An integer representing the current length of the selected neighbor's
retransmit queue.
OSPF and OSPFv3
396