Reset The Vlan Configuration To Default Setting - NETGEAR M4300 User Manual

M4300 Series and M4300-96X Fully Managed Switches User Manual
The VLAN name can be up to 32 alphanumeric characters long, including blanks. The
default is blank. VLAN ID 1 always uses the name Default.
The VLAN Type field identifies the type of the VLAN you are configuring. You cannot
change the type of the default VLAN (VLAN ID = 1): it is always type Default. When you
create a VLAN using this page, its type is always Static. A VLAN that is created by GVRP
registration initially uses a type of Dynamic. When configuring a dynamic VLAN, you can
change its type to Static.
Click the Add button.
10.
The VLAN is added to the switch.
Click the Apply button.
11.
Your settings are saved.

Reset the VLAN Configuration to Default Setting


To reset the VLAN configuration to default settings:
Launch a web browser.
1.
In the address field of your web browser, enter the IP address of the switch.
2.
The login window opens.
Enter the user name and password.
3.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
Click the Login button.
4.
The System Information page displays.
Select Switching> VLAN > Advanced > VLAN Configuration.
5.
Configure Switching Information
180