View Switch Information Or Change The Switch Device Name; View Or Clear The Port Statistics - NETGEAR GS110 User Manual

8-Port Gigabit Ethernet Smart Managed Plus Switch Model GS110EMX
By default, mirroring is disabled.
9. Click the Apply button.
Your settings are saved.
View Switch Information or Change the
Switch Device Name
You can view the switch product name (model), serial number, MAC address, firmware
version, DHCP mode, and other network information.
You can also change the switch device name. This device name shows in, for example,
Windows Explorer and Bonjour.
To view information about the switch or change the switch device name:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that
is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
4. Enter the switch password.
The default password is password. The password is case-sensitive.
The Switch Information page displays.
To navigate to this page, select System > Management > Switch Information.
5. To change the switch device name, do the following:
a. In the Switch Name field, enter a name of up to 20 characters.
b. Click the Apply button.
Your settings are saved.

View or Clear the Port Statistics

For each switch port, you can view the bytes received, bytes sent, and cyclic redundancy
check (CRC) error packets.
Manage and Monitor the Switch 71 User Manual