Local Browser Interface Device View - NETGEAR M4300 User Manual

M4300 Series and M4300-96X Fully Managed Switches User Manual

Local Browser Interface Device View

The Device View is an HTML applet that displays the ports on the switch. This graphic
provides an alternate way to navigate to configuration and monitoring options. The graphic
also provides information about device ports, current configuration and status, tables, and
feature components.

To use Device View:
Launch a web browser.
1.
In the address field of your web browser, enter the IP address of the switch.
2.
The login window opens.
Enter the user name and password.
3.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
Click the Login button.
4.
The System Information page displays.
Select System > Device View.
5.
As an example, the following figure shows the Device View page for model M4300-52G.
As another example, the following figure shows a close up of the Device View page for
model M4300-24X.
The port coloring indicates whether a port is currently active. Green indicates that the port
is enabled; red indicates that an error occurred on the port, or that the link is disabled.
As yet another example, the following figure shows a close up of the Device View page
for model M4300-96X. This figure shows an APM402XL port card in slot 5 and another in
slot 8. Port 1/5/6 is expanded into four 10G ports, but port 1/5/5 is in 40G mode. Both port
1/8/1 and port 1/8/5 are in the default 40G mode.
Getting Started
27