NETGEAR M4300 User Manual page 676

M4300 Series and M4300-96X Fully Managed Switches User Manual
Click the Login button.
4.
The System Information page displays.
Select Maintenance > Troubleshooting > Traceroute IPv6.
5.
In the IPv6 Address/Hostname field, enter the IPv6 address or host name of the station to
6.
which you want the switch to discover a path.
The initial value is blank. The IPv6 address or host name you enter is not retained across
a power cycle.
Enter the Probes Per Hop.
7.
The default value is 3. The range is 1 to 10.
Enter the Maximum TTL for the destination.
8.
The default value is 30. The range is 1 to 255. The MaxTTL you enter is not retained
across a power cycle.
Enter the Initial TTL to be used.
9.
The default value is 1. The range is 1 to 255. The InitTTL you enter is not retained across
a power cycle.
Enter the Maximum Failures allowed in the session.
10.
The default value is 5. The range is 1 to 255. The MaxFail you enter is not retained across
a power cycle.
Interval (secs) - Enter the time between probes in seconds.
11.
The default value is 3. The range is 1 to 60. The interval that you enter is not retained
across a power cycle.
Enter the UDP Destination Port in probe packets.
12.
Maintenance and Troubleshooting
676