View Diffserv Service Statistics - NETGEAR M4300 User Manual

M4300 Series and M4300-96X Fully Managed Switches User Manual
Use one of the following methods to select an interface:
6.
In the Go To Interface field, enter the interface in the unit/slot/port format and click on
•
the Go button.
Next to the Interface column, select the check box for the interface that you want to
•
configure.
Policy Name. Lists all the policy names from which one can be selected.
7.
This field is not shown for read/write users where the inbound service policy attachment is
not supported by the platform.
Click the Apply button.
8.
Your settings are saved.
Table 185. Service Interface Configuration
Field
Direction
Operational Status

View DiffServ Service Statistics

This page displays class-oriented statistical information for the policy, which is specified by
the interface and direction. The Member Class list is populated on the basis of the specified
interface and direction and hence the attached policy (if any). Highlighting a member class
name displays the statistical information for the policy-class instance for the specified
interface and direction.

To view the DiffServ service statistics:
Launch a web browser.
1.
In the address field of your web browser, enter the IP address of the switch.
2.
Description
Shows that the traffic direction of this service interface is In.
Shows the operational status of this service interface, either Up or
Down.
Configure Quality of Service
484