NETGEAR M4300 User Manual page 336

M4300 Series and M4300-96X Fully Managed Switches User Manual
destination of the route. The destination netmask in the access list serves as a wildcard
mask, indicating which bits in the route's destination mask are significant for the filtering
operation.
Click the Apply button.
10.
Your settings are saved.
The following table describes the RIP Route Redistribution nonconfigurable data that is
displayed.
Table 121. RIP Route Redistribution Summary
Field
Source Protocol
Redistribute Mode
Metric
Distribute List
The following list of redistributed routes is valid when OSPF is selected as source. The list can include one
or more of:
Match Internal
Match External Type 1
Match External Type 2
Match NSSA External Type 1
Match NSSA External Type 2
Description
The source route to be redistributed by RIP. The valid values are as
follows:
Connected
•
Static
•
OSPF
•
The route redistribution mode for a particular source protocol. By
default this is disabled.
The metric of redistributed routes for the given source route. The field
displays 0 when the metric is not configured.
The access list that filters the routes to be redistributed by the
destination protocol. The field displays 0 when not configured.
Sets internal OSPF routes to be redistributed.
Sets external type 1 OSPF routes to be redistributed.
Sets external type 2 OSPF routes to be redistributed.
Sets NSSA external type 1 OSPF routes to be redistributed.
Sets NSSA external type 2 OSPF routes to be redistributed.
Routing
336