Configure A Private Vlan Promiscuous Interface - NETGEAR M4300 User Manual

M4300 Series and M4300-96X Fully Managed Switches User Manual

Configure a Private VLAN Promiscuous Interface


To configure a private VLAN promiscuous interface:
Launch a web browser.
1.
In the address field of your web browser, enter the IP address of the switch.
2.
The login window opens.
Enter the user name and password.
3.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
Click the Login button.
4.
The System Information page displays.
Select Security > Traffic Control > Private VLAN > Private VLAN Promiscuous
5.
Interface Configuration.
Use Promiscuous Primary VLAN to set the primary VLAN ID for Promiscuous Association
6.
mode.
The range of the VLAN ID is 2–4093.
Use Promiscuous Secondary VLAN ID(s) to set the secondary VLAN ID list for
7.
Promiscuous Association mode.
This field can accept single VLAN ID or range of VLAN IDs or a combination of both in
sequence separated by ','. You can specify individual VLAN ID, such as 10. You can
specify the VLAN range values separated by a hyphen, for example, 10-13. You can
specify the combination of both separated by commas, for example:
12,15,40–43,1000–1005, 2000. The range of the VLAN ID is 2–4093.
The VLAN ID List given in this control replaces the configured
Note:
secondary VLAN list in the association.
Click the Apply button.
8.
Your settings are saved.
Manage Device Security
554