View And Clear The Trap Logs - NETGEAR M4300 User Manual

M4300 Series and M4300-96X Fully Managed Switches User Manual
From the IP Address Type menu, select the address type of host.
•
IPv4
-
IPv6
-
DNS
-
In the Host Address field, specify the address of the host configured for the syslog.
•
In the Port field, specify the port on the host to which syslog messages are sent.
•
The default port is 514.
Select the severity option in the Severity Filter list.
•
A log records messages equal to or above a configured severity threshold. These
severity levels are available:
Emergency (0). The system is unusable
-
Alert (1). Action must be taken immediately
-
Critical (2). Critical conditions
-
Error (3). Error conditions
-
Warning (4). Warning conditions
-
Notice (5). Normal but significant conditions
-
Informational (6). Informational messages
-
Debug (7). Debug-level messages
-
Click the Apply button.
7.
Your settings are saved.
The following table describes the nonconfigurable information.
Table 221. Syslog Configuration
Field
Messages Received
Messages Relayed
Messages Ignored

View and Clear the Trap Logs

You can view and clear the entries in the trap log. The information can be retrieved as a file.

View and clear the trap logs:
Launch a web browser.
1.
In the address field of your web browser, enter the IP address of the switch.
2.
The login window opens.
Description
The number of messages received by the log process. This includes messages
that are dropped or ignored.
The count of syslog messages relayed.
The count of syslog messages ignored.
Monitor the System
637