Configure An Mvr Interface - NETGEAR M4300 User Manual

M4300 Series and M4300-96X Fully Managed Switches User Manual
The following table describes the nonconfigurable information displayed on the page.
Table 92. MVR Group Configuration
Field
Status
Members

Configure an MVR Interface


To configure an MVR interface:
Launch a web browser.
1.
In the address field of your web browser, enter the IP address of the switch.
2.
The login window opens.
Enter the user name and password.
3.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
Click the Login button.
4.
The System Information page displays.
Select Switching > MVR > Advanced > MVR Interface Configuration.
5.
The status of each port displays.
Use Interface to select the interface.
6.
Use Admin Mode to Enable or Disable MVR on a port.
7.
The factory default is Disable.
Use Type to configure the port as an MVR receiver port or a source port.
8.
The default port type is none.
Use Immediate Leave to Enable or Disable the Immediate Leave feature of the MVR on
9.
a port.
Definition
The status of the specific MVR group.
The list of ports that participate in the specific MVR group.
Configure Switching Information
256