Configure Green Ethernet Remote Device Details - NETGEAR M4300 User Manual

M4300 Series and M4300-96X Fully Managed Switches User Manual

Configure Green Ethernet Remote Device Details


To configure the Green Ethernet remote device information:
Launch a web browser.
1.
In the address field of your web browser, enter the IP address of the switch.
2.
The login window opens.
Enter the user name and password.
3.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
Click the Login button.
4.
The System Information page displays.
Select System
5.
The Green Ethernet Details page displays.
Scroll down to the Remote Device Information section.
6.
Select the Interface.
7.
The following table describes the nonconfigurable fields.
Table 28. Green Ethernet Remote Device Information
Field
Remote ID
Remote Tw_sys_tx (uSec)
Remote Tw_sys_tx Echo (uSec)
Remote Tw_sys_rx (uSec)
Remote Tw_sys_rx Echo (uSec)
Remote Fallback Tw_sys (uSec)
 
Management Green Ethernet
Description
The remote client identifier assigned to the remote system.
Integer that indicates the value of Tw_sys that the remote system can
support.
Integer that indicates the value of Transmit Tw_sys echoed back by the
remote system.
Integer that indicates the value of Tw_sys that the remote system
requests from the local system.
Integer that indicates the value of Receive Tw_sys echoed back by the
remote system.
Integer that indicates the value of fallback Tw_sys that the remote
system is advertising.
Configure System Information

Green Ethernet Details.
87