Configure Igmp Snooping For Interfaces - NETGEAR M4300 User Manual

M4300 Series and M4300-96X Fully Managed Switches User Manual
This specifies the administrative mode for IGMP snooping for the switch. The default is
Disable.
Use the Validate IGMP IP header option to Enable or Disable header validation for all
7.
IGMP versions.
If Validate IGMP IP Header is enabled, then IGMP IP header checks for Router Alert
option, ToS and TTL. The default value is Enable.
Select the Proxy Querier Mode Enable or Disable radio button.
8.
This enables or disables IGMP proxy querier on the system. If disabled, then the IGMP
proxy query with source IP 0.0.0.0 is not sent in response to IGMP leave packet. the
default value is Enable.
Click the Apply button.
9.
Your settings are saved.
The following table displays information about the global IGMP snooping status and statistics
on the page.
Table 86. IGMP Snooping Configuration
Field
Multicast Control Frame Count
Interfaces Enabled for IGMP
Snooping
VLAN IDs Enabled For IGMP
Snooping

Configure IGMP Snooping for Interfaces


To configure IGMP snooping for interfaces:
Launch a web browser.
1.
In the address field of your web browser, enter the IP address of the switch.
2.
The login window opens.
Enter the user name and password.
3.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
Click the Login button.
4.
The System Information page displays.
Select Switching> Multicast > IGMP Snooping > Interface Configuration.
5.
Description
The number of multicast control frames that are processed by the CPU.
A list of all the interfaces currently enabled for IGMP snooping.
Displays VLAN IDs enabled for IGMP snooping.
Configure Switching Information
235