Configure The Lldp Interface - NETGEAR M4300 User Manual

M4300 Series and M4300-96X Fully Managed Switches User Manual
Select System > LLDP > Global Configuration.
5.
In the Transmit Interval field, enter the interval in seconds to transmit LLDP frames.
6.
The range is from 5 to 32768 secs. The default value is 30 seconds.
In the Transmit Hold Multiplier field, enter the multiplier on Transmit Interval to assign TTL.
7.
The range is from 2 to 10 secs. The default value is 4.
In the Re-Initialization Delay field, enter the delay before re-initialization.
8.
The range is from 1 to 10 secs. The default value is 2 seconds.
In the Notification Interval field, enter the interval in seconds for transmission of
9.
notifications.
The range is from 5 to 3600 secs. The default value is 5 seconds.
Click the Apply button.
10.
Your settings are saved.

Configure the LLDP Interface


To configure the LLDP interface:
Launch a web browser.
1.
In the address field of your web browser, enter the IP address of the switch.
2.
The login window opens.
Enter the user name and password.
3.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
Click the Login button.
4.
The System Information page displays.
Configure System Information
134