NETGEAR M4300 User Manual page 356

M4300 Series and M4300-96X Fully Managed Switches User Manual
Click the Login button.
4.
The System Information page displays.
Select Routing > OSPF > Advanced > NSSA Area Configuration.
5.
Enter the OSPF Area ID.
6.
An area ID is a 32-bit integer in dotted-decimal format that uniquely identifies the area to
which a router interface connects.
Configure the Import Summary LSAs by selecting Enable or Disable from the list.
7.
If you select Enable, summary LSAs are imported into NSSA areas.
Configure the Default Information Originate.
8.
This option lets you advertise a default route into the NSSA when the import of summary
LSAs is disabled.
a. In the Admin Mode list, select to Enable or Disable the default information originate.
b. In the Metric Value field, set the default metric value for default information
originate. The value range of values is 1 to 16777214.
c. In the Metric Type field, select the type of metric specified in the Metric Value field.
Options are as follows:
Comparable Cost. External type 1 metrics that are comparable to the OSPF
•
metric.
Non-comparable Cost. External type 2 metrics that are assumed to be larger
•
than the cost of the OSPF metric.
Select the Translator Role of the NSSA.
9.
Options are as follows:
a. Always. Cause the router to assume the role of the translator the instant it becomes a
border router.
OSPF and OSPFv3
356