NETGEAR M4300 User Manual page 85

M4300 Series and M4300-96X Fully Managed Switches User Manual
Enter the user name and password.
3.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
Click the Login button.
4.
The System Information page displays.
Select System

5. Management
From the Interface menu, select the interface.
6.
Use the EEE Admin Mode selection to enable or disable Energy Efficient Ethernet Admin
7.
Mode on the port. With EEE mode enabled, the port transitions to low power mode during a
link idle condition. The default value is Disabled. If EEE Admin Mode is not supported, then
N/A is displayed.
In the EEE Transmit Wake Time field, enter the time for which MAC/switch must wait to go
8.
back to active state from LPI state when it receives a packet for transmission. The range is
8 to 65535. The default value is 17.
Click the Apply button.
9.
Your settings are saved.

Green Ethernet
Configure System Information
85

Green Ethernet Details.